Pay it forward!!!

[7tooZ]

I believe I do I’ll look tomorrow


Sent from my iPhone using Classic Zcar Club mobile

[Jeff Berk]

Does anyone have a fast idle setting screw tab off of a 240z or 260z. I'm talking about that triangular piece that is attached by two screws and uses a third screw to push against the throttle linkage to increase the RPM for tuning the carb's?  I've got a 260z with round tops so the setup is likely the same as a 240z.

[7tooZ]

On 10/9/2017 at 3:41 PM, jcb said:

Anyone out there have left side upper door hinge? I'm in need if you do. Thanks, JCB

I found the hinge I have and it is a RH side. Sorry

[jcb]

Thanks for looking,   jcb    Anyone else Drivers side upper Door hinge,  i will be more than happy to pay for it and shipping.  thanks

[grannyknot]

1 hour ago, jcb said:

Thanks for looking,   jcb    Anyone else Drivers side upper Door hinge,  i will be more than happy to pay for it and shipping.  thanks

I have one, it's from a car that had 130,000 miles on it so it has a bit of play in the hinge pin but it's yours for the cost of shipping.

[jcb]

Thank you very much. Just let me know what I will owe and how to pay you, JCB

Edited October 11, 2017 by jcb

[grannyknot]

8 hours ago, jcb said:

Thank you very much. Just let me know what I will owe and how to pay you, JCB

PM sent.

[grannyknot]

The hinge is on its way, will take about a week to get to you.

[2377kN]

I have a set of 14” Western wheels that I need to get rid of.  They are free to pickup.  I am in the Burbank, CA area. 

 

Update:  Wheels are gone.

 

 

Edited October 25, 2017 by 2377kN
Was giving away wheels, they are now gone

[gundee]

I have a used 76 280Z FSM if anyone wants it.

All complete just dirty on the outside.

[Mark Maras]

@Redwing has a 76.

[Redwing]

Thanks Mark.  I have an FSM, thanks to Johnathan Russel.

Edited November 8, 2017 by Redwing
error