Jump to content

IGNORED

Car won't start with key


anthony280z2+2

Recommended Posts

you said that it makes a noise by the link and not the relay by the foot well on the passenger side? The link is down by the starter, in fact it connects the starter to the wiring harness. If you are hearing noise in that location is sounds to me that you have a bad connection there. Check closely the small wire that connects to the solenoid spade connector.

This may sound like a funny question , but do the headlight work ok? and have you checked the fuses with a multimeter? Don't just rely how they look. Believe me I know. Especially the 3rd fuse up from the bottom on the driver side.

I hope this is not the case , but I have had two instances where a factory splice that is buried in the harness has failed. Check these things and if that doesn't fix the problem, send me a PM

Gary

Link to comment
Share on other sites

you said that it makes a noise by the link and not the relay by the foot well on the passenger side? The link is down by the starter, in fact it connects the starter to the wiring harness. If you are hearing noise in that location is sounds to me that you have a bad connection there. Check closely the small wire that connects to the solenoid spade connector.

This may sound like a funny question , but do the headlight work ok? and have you checked the fuses with a multimeter? Don't just rely how they look. Believe me I know. Especially the 3rd fuse up from the bottom on the driver side.

I hope this is not the case , but I have had two instances where a factory splice that is buried in the harness has failed. Check these things and if that doesn't fix the problem, send me a PM

Gary

Link to comment
Share on other sites

Anthony, in the 1978 models, all the relays are inside that box the fusible links are mounted to. In previous years many of these relays were located inside the cabin.

I think the starter wire should run from the key switch to the solenoid, but it might run through a couple of connectors to get there. Do you have a factory service manual to help you with this job?

Someone posted a '78 wiring diagram not long ago. See if you can find it. If you can't, perhaps I can email it to you.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 747 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.