I've looked everywhere but I'm obviously missing something. I'm looking for this kit below..... I need the bar, end links, hanger plates and mounting brackets with Urethane bushings..

After doing the rear disk brake conversion on the 260Z, the E-Brake cable bracket is now in the way, making the stock bar and body mounts obsolete or useless.

Please help,

Dave

They still sell them. I got mine from Betamotorsports.

Not applicable, but now I know what color my suspension parts need to be!

That gray/silver color will look great against a black background of chassis-black/rattle-can/undercoating etc!

Great choice Dave!

Summit Racing had the best deal when I bought one a few years back. You have to call them though, they aren't on the website or in the catalog.

Thanks guys.

oldhemi.... That's actually silver POR15. it just looks grey in the old picture. That's my 70's suspension and now I need to do the same on the 260Z.

I'll call summit this week Jon, Thanks for the input.

BTW, Just got back from the XXX in Issaquah, Saw MikeB and his son there. We're all hoping to get together for the Golden Gardens event in March. You going?

Dave

I'm not much of a car show guy, and I don't have a Z to bring since mine is still on the rotisserie, so probably no.

BTW... I can order just the hardware kit if you already have the bar.

I would need the whole kit, bar, brackets, mounts and bolts, end links and all urethane.

I'll look into it this week.

Thanks again guys,

Dave

  Zs-ondabrain said:

That's actually silver POR15. it just looks grey in the old picture. That's my 70's suspension and now I need to do the same on the 260Z.

Thinking about silver POR on the brake and fuel lines. Wha-da-ya-think?

Actually, I have a small supply of silver POR15's brake lines. But it was not done properly. A lot of the nuts are painted in a perminant setting and are now useless. So if you do it, be careful to seal the nut from the line so it don't freeze in place. You know what I mean.

Dave