Spash Pan bolt size?

[Mark Schue]

Does anyone know the correct bolt size for the splash pans?

Thanks,

Mark

[zKars]

97.23% chance they are M6 x 1.00. 15 mm length would be just fine. Not positive since I'm not in a spot where I can check, but the only other size that even remotely possible is M5 x 0.8. Can't imagine they are M8x1.25, but I've never had a Z in the shop that had a pan or had a chance to put one back on! The holes I've seen in the rad support and frame rails seem to me to be M6

[Mark Schue]

Thanks.

[Travel'n Man]

They are on ebay all the time - I've been looking for a splash pan with no luck but I see the bolts - you have the pan and can't find the bolts - life is a strange thing some times!

[Mark Schue]

Yea e-bay, $13.99 + 3.95 shipping for 10 bolts. I'm 92.23% sure the .20 ones from my the hardware store on the way home will do just fine....

Good luck finding your pan. I just got mine....they are getting expensive.

[webdawg1]

agree with zKars...6mm x 1.0 x 15mm...just happen to have them sitting right here on the desk...

webdawg1

[vercingetorix]

I got a deal on a late model pan,can I adapt it to my '71?

[Bonzi Lon]

My problem is not the splash pan, it is on the garage wall nice and straight, rust free and in primer. Nor is it the bolts, I have the genuine Nissan number on file and ready to order. My problem is I have to remove 9 broken off bolts.

Bonzi Lon

[Travel'n Man]

Lonny-

I hate it when that happens - once is bad enough, but 9 times!

[ajmcforester]

Sorry to bring up an old thred, but I can't find in my parts catalog the part number for the 240Z pan screws/blots. does someone have it?

[Mike B]

Sorry to bring up an old thred, but I can't find in my parts catalog the part number for the 240Z pan screws/blots. does someone have it?

08360-51226

http://www.classiczcars.com/forums/showpost.php?p=272033&postcount=5

-Mike

[ajmcforester]

Thanks Mike, I was touring the US in conferences when that post was made