Interested, restoring 2675, I think it would apply to that car.

 

I just finished reproducing a '71 emissions decal for my car.  It has the part number

on the lower left corner and was done on gold vinyl decal material.  I would be 

willing to see if I could have this decal reproduced, but won't be able to do any

thing for a few week as I just fractured my pelvis in three places.   

Here is a picture of this decal on my car.

 

 

 

 

 

 

I just finished reproducing a '71 emissions decal for my car.  It has the part number
on the lower left corner and was done on gold vinyl decal material.  I would be 
willing to see if I could have this decal reproduced, but won't be able to do any
thing for a few week as I just fractured my pelvis in three places.   
Here is a picture of this decal on my car.
 

Get well soon. How do you do such a thing.
Don

Thanks!  Took a header down my favorite hiking trail by catching my toe on

a boulder and landing hard, and 2 feet down, on my right knee.  That jammed

right femur into pelvis causing multiple fractures.  " Ouch" doesn't begin to

describe the pain.

 

When I was rehabbing a full hip replacement the people there with fractured hip were in misery. Good luck


Don's iPhone using Classic Zcar Club mobile

16 minutes ago, AZ-240z said:

" Ouch" doesn't begin to describe the pain.

Wow... I bet. That doesn't sound like any fun at all. Here's to hoping you mend quickly!! 

All the Best Dan--

I'm hoping for you to have a speedy complete recovery.

Jim D.

"Zup"

Dan - Sorry to hear of your injury.  +1 on that speedy recovery comment.  Pace yourself and give those bones plenty of time to heal well and correctly.

Jim

I measured the decal on my HLS30-00032 car this morning and it's 3 9/16" wide by 2 3/4" tall. I'll check the ones I removed from other cars tonight or tomorrow.

Sent from my SM-G935P using Classic Zcar Club mobile

That's great. It's smaller than I thought. Better measure twice and cut once. 

On 4/20/2010 at 6:27 PM, Mike B said:

1969 production cars for the US market have a different emissions decal mounted to the underside of the hood than later 1970 model year cars. I'm not sure if Canada or other markets have the same decal as well. I recently found that HLS30-01590 (a 1/70 production car) has this same emission decal. I didn't think a car with that high of a VIN would still have this sticker (it also has the earliest hood design). Does anyone with a higher VIN ahave this early decal?

I don't think anyone has reproduced this, due to the limited market for them. I am trying to get an idea of the size of the market to see if it would be worth while to have some reproductions made. I checked with Banzai Motorsports and they don't have any. They sell a different emissions sticker (DE07) that I believe is for later 1970 production cars, but I am not sure what the cutoff is. Also, if anyone knows of a good source to reproduce these metallic decals let me know. Thanks.

-Mike

Mike,

I could give this a try, but would need a few things. 

1.  A high resolution picture taken as directly head on as possible

     to reduce distortion.

2.  The best discription possible of the silver color and gloss level

      as this is the most difficult part of reproducing these decals for

      greatest authenticity.

      Even mailing samples back and forth may be worth the effort.

let me know.

Dan