another battery box area question

[lbpdz]

so, after much searching does anyone know of a thread I can not find dealing with the battery tray area (cleaning it out and prepping it for paint). What tools to use to break out the welds holding the tray in, etc..

Thanks again..

[JohnnyO]

This may help.

http://www.classiczcars.com/forums/showthread.php?t=31988&highlight=%22battery+Tray+removal%27

John

[GreenZZZ]

Here is a photo of my hacking my way through the job. I went too far on two spot welds. The bit is the harbor freight spot weld removal bit. Dave Zs-ondabrain has a nice post somewhere on using the bit to pop off a bent up roof. Wish I read that prior to doing my battery tray.. :stupid:

http://www.classiczcars.com/photopost/showphoto.php?photo=32231&ppuser=14083

I missed one spot weld and ended up ripping a piece of sheet metal, so these photos show you what can go wrong.

http://www.classiczcars.com/photopost/showphoto.php?photo=32234&ppuser=14083