biddljj Posted May 11, 2010 Share #1 Posted May 11, 2010 When my 240Z got painted the headlight cowls were off the car.During the painting process the cowl bolts got a good dose of paint.What is the best method for cleaning up the threads ?Thanks, Jay Link to comment Share on other sites More sharing options...
AZ-240z Posted May 11, 2010 Share #2 Posted May 11, 2010 You could mask off the paint work and try using some medium grade steel wool. I wouldn't use anything caustic or wire brush wheels for fear of accidental damage to the paint.BE CAREFULDan Link to comment Share on other sites More sharing options...
Arne Posted May 11, 2010 Share #3 Posted May 11, 2010 I'd use the appropriate size thread die. Link to comment Share on other sites More sharing options...
Inf Posted May 11, 2010 Share #4 Posted May 11, 2010 I'd use the appropriate size thread die.This.Or, use it as an opportunity to find the appropriately sized stainless hardware. Link to comment Share on other sites More sharing options...
grantf Posted May 12, 2010 Share #5 Posted May 12, 2010 I'd use the appropriate size thread die.ditto Link to comment Share on other sites More sharing options...
240znz Posted May 12, 2010 Share #6 Posted May 12, 2010 If you don't want to buy a suitable die, just run the thread through a new nut. Most of the paint should come off, if not soak it in thinners and try again. For what you are doing, it would be a lot quicker.Or as above, change to stainless would be probably more cost effective also. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now