Reverend Posted May 15, 2010 Share #1 Posted May 15, 2010 Am i in trouble? I bought new ignition switch and it has some difference between original. What are those 2 wires? Link to comment Share on other sites More sharing options...
sblake01 Posted May 15, 2010 Share #2 Posted May 15, 2010 Those are for the 'key in' buzzer. Link to comment Share on other sites More sharing options...
Reverend Posted May 15, 2010 Author Share #3 Posted May 15, 2010 Alright, so not important. The buzzer is not working so it wont do any difference. Thanks! No i gotta find some tool to remove those "anti-theft" screws. Link to comment Share on other sites More sharing options...
Arne Posted May 15, 2010 Share #4 Posted May 15, 2010 Several ways to do that. One of the most common is to use a Dremel tool (or similar) to cut a slot in the head and use a screw driver on them. Others have used a hammer and punch, while yet other people will use a drill and drill the heads off. Link to comment Share on other sites More sharing options...
sblake01 Posted May 15, 2010 Share #5 Posted May 15, 2010 I drill a hole in them and use a Craftsman 'Screw out' tool. Link to comment Share on other sites More sharing options...
Reverend Posted May 18, 2010 Author Share #6 Posted May 18, 2010 New ignition switch on place and working! I hammered the old screws off with flathead screwdriver, luckily they were not tight. In new one, "anti-theft" screws have 5.5mm bolt heads wich can be snapped off easily. I wont snap them in case i need to remove that switch again. Nice to have reliable switch Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now