I have got a problem with my ignition, the car starts fine but won't keep running. I can turn the key to start and no problem but when it goes back to ON the engine cuts out. I thought that it was the electical part of the ignition in the back of the lock so i ordered a new one from MSA, however the problem still occurs. Everything seems to be in good order, ie fuses, alternator, coil and ignition switch (the electrical module behind the lock), could my problem be the VR. If anyone has had this problem or knows an obvious solution please let me know.

Hmm, sounds like it's in the switch, the way you say it cuts off as soon as you release the key.....Is the key "loose" in the switch? Or it could be the key is part of the problem....

I thought it was the switch too, but i ordered a new one from MSA and the engine still cuts out. Right now i don't even have the lock attached i just used a screw driver to turn the switch to start. Car turns over and hums, if i ease of on the switch the started will disengage but if i let it go back to on then it cuts out.

check your ballast resistor

If the ballast resistor is the small box that resides right under the coil then that was the problem. The two wires that come off it weren't connecting properly. I had narrowed it down to my crane ignition and that so now all is well. Thanks all

yep, that's the BR. Remember. if the car will only run with the key in the start position, the ballast resistor is the culprit. Glad it worked out quickly for you, i spent days and $ on a new switch too...:stupid:

hello and how ya all doing? i need help. i bought a 76 datsun 280 from a friend. he told me all i need to change is the feul pump and the car will start up. i changed the pump and put in a battery. i tried to the start the car but not cranking or sing of trying to start. but all headlight and taillight turns on and off. pls help me solve this problem. any idea will help. i am also looking for a wiring diagram on how to installa an aftermarket stereo and installating racing on this car. thanks for your help.