I searched the site but came up empty in terms of finding this part, it looks to be NLA.

My question is what is a suitable alternative to use. Although I consider my car restored, I'm not into the concours thing so changing on this item will not be the end of the world.

What have some of you guys used, or if you fabricated your own make me some........I have a paypal account.

Thanks,

Randy

Think this is what you are looking for...should be able to still get these from your local Nissan dealer...

Part Number: 46206-18000 (up to 7307)

Part Number: 46206-M0200 (from 7308)

webdawg1

Edited October 13, 201014 yr by webdawg1

Sorry, I should have given more detail. It is the piece that holds the brake lines to the firewall and sides. I believe it has two screw openings and a rubber piece in between.

see link listed below:

http://www.carpartsmanual.com/datsunS30/DatsunFairladyZIndex/Brake/BrakePiping/ToJun72/tabid/1738/Default.aspx

probably making reference to item(s) #27, #30, #31 I think...

webdawg1

Are you looking for the black rubber insulators or the metal clip that goes on top and holds them in place? Jim Frederick was selling sets of the black rubber insulators that he had reproduced. If you are looking for the metal clip and screws you would probably need to get them from a parts car. Johnny'O has a car he is parting out I believe.

-Mike

edit: Actually I think the set Jim was selling was just for the fuel lines.

Edited October 13, 201014 yr by Mike B

Thanks fella's

I actually need both the rubber and the plate for fuel line also. (I forgot about the fuel line's)

I'll check into the sources ya'll mentioned.

Thanks again.