Enkei 92 Wheels

[503Alex]

I'm looking at a set of Enkei 92 wheels for my Z that are 14x6 ET 33. Am I correct in assuming I would need at least a 20-30 mm spacer on these for good fitment? I'm not a fan of running big spacers, but I figured it was a good deal for these at $250 w/ tires. Also, anyone know a good place to find spacers if I end up going that route?

Thanks,

Alex

[70 Cam Guy]

When the spacer gets that thick, it's best to use the bolt-on style. The factory studs are too short to use even for a 10mm plate.

Keep in mind, 25mm and larger spacers usually run $80 a pair and up. Buying 4 spacers that large may negate any savings on those wheels.

Those Enkei's were made in 15x7 ET0 (zero) if I recall, they will certainly be an easier fit and you can sometimes find them for very close to the price on those 14s

[503Alex]

Great info, thanks for the help!

[Zs-ondabrain]

If it makes ya feel better, Enkei Decided to bring back the 92's. Part of there display at SEMA this year was a Beautiful 72'?? white 240Z with Black 92's on one side and gold 92's on the other. And a silver wheel on display in front of the car.

Here's the link with more wheel and Z pics. My buddy sent me cell phone pics from the show, he knows what I like.

http://www.blog.enkei.com/2010/11/04/enkei-wheels-at-sema-2010/

Dave

[70 Cam Guy]

If it makes ya feel better, Enkei Decided to bring back the 92's. Part of there display at SEMA this year was a Beautiful 72'?? white 240Z with Black 92's on one side and gold 92's on the other. And a silver wheel on display in front of the car.

Here's the link with more wheel and Z pics. My buddy sent me cell phone pics from the show, he knows what I like.

http://www.blog.enkei.com/2010/11/04/enkei-wheels-at-sema-2010/

Dave

More coverage of that Z here...

http://japanesenostalgiccar.com/blog/2010/11/04/events-the-2010-sema-show/

They look better than I expected after seeing the initial press photos

[503Alex]

If it makes ya feel better, Enkei Decided to bring back the 92's. Part of there display at SEMA this year was a Beautiful 72'?? white 240Z with Black 92's on one side and gold 92's on the other. And a silver wheel on display in front of the car.

Here's the link with more wheel and Z pics. My buddy sent me cell phone pics from the show, he knows what I like.

http://www.blog.enkei.com/2010/11/04/enkei-wheels-at-sema-2010/

Dave

More coverage of that Z here...

http://japanesenostalgiccar.com/blog/2010/11/04/events-the-2010-sema-show/

They look better than I expected after seeing the initial press photos

Good info! I've been drooling over that Z. I might just have to save up and buy some of the new ones. From what Arne says it may be a one piece cast as opposed to the original two piece forged. That's a bit of a bummer, but it will still be pretty light I'm sure.

[70 Cam Guy]

I'd still rock the originals if I found some (and didn't have my current rims). They were great wheels.