clutch problem

[knapper]

hi guys put a new clutch in my 73 new nebco slave can not get it to go into gear the adjustment is all the way and still will not go far enough never had this happen before any idea of the problem mike:stupid:

[ajmcforester]

It sounds like air in the system. One little air bubble allows for gas compression making the system not work well. Sometimes if you get air in the master, it gets sometimes tricky to get out. If you can get someone to compress the clutch and blead the clutch that way you may dislodge the air bubble.

The other thing you replaced the slave did you replace the master, maybe it needs new seals?

[ajmcforester]

If you need a good master I do have one I took apart today that will fit your year, it is in good shape the rubber is like new inside just let me know

[knapper]

almost the adjustment rod that pushes the clutch arm is just too short have it in the last threads and it works but needs a weebit more lenth never had this problem before

[Diseazd]

Have you installed the proper bearing collar for the pressure plate that you installed? Example: 240Z pressure plate requires 240Z collar.......280Z pessure plate requires 280Z collar etc. I'm not sure what the difference is in slave cylinders, but they should be matched......240Z pressure plate,collar and slave cylinder etc. etc.