fender pics

[pjoe]

If anyone has or gets a chance to take a picture of the bottom rear front fender where it mounts to the body...it would be a great help. fenders were rusted so bad i cant tell how the bottom is supposed to look. im not using a repair panel so a picture will help me get it close to right. i probably should have put this in help section. sorry

Brian

Edited December 9, 2010 by pjoe
probably should be help section

[ajmcforester]

I have pictures, lots of pictures of my car and I might have the one you are looking for. My car is less than 25' from my bed so I can get pictures if not. To help can you take a picture of the area in question so I can get what would help you out the most?

[pjoe]

here is the front left fender. curious as to what it should look like. pretty sure i cut to much off bottom of new(now rusted) metal.

[ajmcforester]

here is the front left fender. curious as to what it should look like. pretty sure i cut to much off bottom of new(now rusted) metal.

It is to dark now and cold I'll take some pictures tomorrow. It loooks like your missing a bracket that the fender bolts to you'll see tomorrow

[pjoe]

cool. thanks for the response.

[TomoHawk]

How did you get the screws out of the bottom? It looks like a phillips head using a smaller bit than usual.

[Carl Beck]

I had to go out to the garage anyway - and it's warmer here.

Here is picture...

FWIW,

Carl B.

[five&dime]

Clean enough to dine on. Well done Carl

[pjoe]

thats exactly what i needed. thanks carl. hopefully get these things bolted up this weekend. definately need to redo what i already did. should have seen a picture before i cut the extra 3 inches off. oh well f it.

[ajmcforester]

Ya Carl looking good like ushual. Can't wait for mine to look that way . . .

Hear are some pictures I took them from the right easier to get to in my garage I some of the back side in case you might want them. Besides Carl was first with the underside picture

Edited December 10, 2010 by ajmcforester

[pjoe]

cool thanks for the pics. theyre all helpful. wasnt sure if i needed the lip on the bottom all the way across but now i see. your right i need to weld that bracket in for the back bolt. carls car looks too clean...i would feel bad driving his as hard as i will drive mine if i ever get back on road.

[ajmcforester]

Without that mount point you would be flapping in the wind. I wish I had a fender off picture that would really help