Looking for a stock cam shaft

[coop]

Does anyone out there have a stock cam shaft they want to part with? My L24 ITS cam is in bad shape so can you help me here? You all probably know that not all "stock" cams are created equal so here are the measurements I made on my cam and I'd like to get one with no less lift than what I have. Here are the dimensions:

Base circle diameter = 3.306mm/1.303"

Base to lobe = 4.03mm/1.582"

Therefore lift = .724mm/.279"

I think it's basically a .28" lift stock cam without oil passages.

I have a spare cam but it has just a little less lift so I'd really like to replicate my primary cam if possible. Just trying to stay within ITS rules and go fast too.

Thanks everyone.

[jmortensen]

I think the stock cams are stamped A, B, C and so on. My bro-in-law probably has 20 cams, I'm sure he could dig you out an A or B or whatever you were looking for. Supposedly the C cam is the way to go, but it cam in the 260 so I don't know if it is legal for your 240. You can email him at MatM AT m2differentials DOT com if you are interested. He's near Sacto, so shipping wouldn't be too bad.

[rxsleeper]

Coop, Nissan comp has them in stock, or at least did earlier this year. Call the folks at Nashville. The "A" cams were in stock and on closeout as I recall. I think they were less than $50.00

Paul