Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

stainless allen engine fasteners


IdahoKidd

Recommended Posts

Hey guys, I am putting my engine back together and would like to find some stainless allen bolts for the valve cover, timing cover, etc. There was talk of someone putting these sets together and I found an old link in a search, but the post was 5 years old and the link no longer valid. Tried various searches through google but didn't come up with much. Any one know where I can get such a kit for a 72 240?

Thanks!

Leonard

Link to comment
Share on other sites


I don't think you're going to find a stainless set put together specifically for the Z anymore. I had searched for that myself and concluded the person who had put those together was no longer doing it.

However I recently bought some SS assortments from www.boltdepot.com (sets #7538, 7537, and 7540), and they worked fine for most of what I was doing. The bolts on the valve cover were a bit long, so nothing I had in my boxed assortments was appropriate. I just derusted and painted what came on the engine.

Here's another company that sells SS fasteners:

http://www.totallystainless.com/

Again, I haven't searched specifically for the longer screws for the covers.

Edited by FastWoman
Link to comment
Share on other sites

Arne, I just sent them (Zcar creations) an email through their website, but the last time I was on this site (perhaps a month ago) it came up as no longer functioning or some such thing. I'll let you know if I get a response.

Sarah, thanks for the tip. There are a couple of local bulk bolt shops in the area and I will give them a call. I think they want to sell them by the box of 25-100 which makes it really cost prohibitive. The local hardware store wants a couple bucks a piece for valve cover bolts (socket head stainless) and there are a ton of them on the pan so major$$$$. Not sure I can justify that much expense for bling..... (my obama bucks seem to be lost in the mail)

Thanks

Leonard

Link to comment
Share on other sites

You can also buy from McMaster-Carr. You can only use short cap allens on the smaller bolts of the water pump or use hex heads. Standard cap heads will interfere with the water pump pulley. These bolts can only be purchased in specific lengths. Some will be too long and will need to be shortened slightly for clearance or visual appearance too. When measuring don't just stick a screwdriver into a blind hole and order the measured depth for two reasons. One is the hole is not fully threaded to that depth and you'll also need to consider the thickness of the ancillary/bracket being attached. That said, get the longer choice as it's easier to shorten than to lengthen. All bolts should extend at least 1.5 times it's diameter into the threaded hole when fitted up properly.

Edited by ezzzzzzz
Link to comment
Share on other sites

You can only use short cap allens on the smaller bolts of the water pump or use hex heads. Standard cap heads will interfere with the water pump pulley.

Good to know. Found a local supplier that will let me purchase individually for around 40cents apiece. Planned on taking the old ones down and matching each one. Can get them for around 20cents but have to buy by the box, usually 25.

Link to comment
Share on other sites

The kit I described in this thread has the valve cover fasteners in an allen head. Contact John or Nancy to see what else they could provide.

http://www.classiczcars.com/forums/showthread.php?t=40653

The entire kit is well thought out and complete with the exception of the front & rear suspension/chassis fasteners.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.