Hello im in the process of finally swapping my automatic tranny for a manual one I haven't been able to find a thread were it tells u the parts needed to for the swap so if any one knows about one please send me the link. So far i have the 5speed tanny n drive shaft, Metal hydraulic line, clutch cylinder, pedals. I stil have to buy the clutch n fly wheel but any other parts i should know about please help me out im still gonna continue searching on other forums but any help will b appreciated!

thanx

cris

Edited January 7, 201114 yr by mota z

Here's a link to one of many links on the subject:

http://www.classiczcars.com/forums/showthread.php?t=21274

Clutch cable? Unless you're converting to a mechanical clutch, there should be no need for a clutch cable. Z-car clutches are hydraulic.

Search is your friend.

sorry about that i ment to say Metal hydraulic line

and thanks for the link sblade01

Arne's write up that sblake01 linked to was the best I could find searching the web. It helped my swap go much easier.

sorry about that i ment to say Metal hydraulic line

and thanks for the link sblade01

I have a really clean clutch line for Auto->Manual trans swap.

If you are interested, I can send you photos. Please PM me.