Hisson0712 no fire

[Hisson0712]

I'm really desperate can anyone help. My 1975 Datsun 280Z straight shift cuts off after being driven and gotten warm. It gets fuel but no fire. I was told it is the ignition control module some say an ignition ignitor and some say coil. Can anyone help and if this is my problem, best location for replacement part. I drove my z to see a friend in the hospital about 45 miles and after visit driving back and having to stop for intersection vehicle cut off and would not start. After sitting for quite a spell it will crank again.

Edited January 14, 2011 by Hisson0712

[78zcar_blue]

Hello,

I would replace it with a HEI Module, it is the best thing to replace the original ignition control module with, plus it is only about $20 or so dollars. I did it with mine and I have not been sorry, plus it is a solid state construction there is an article here on the web site or I can send you what I have on how to wire it up.

[Hisson0712]

I would appreciate any way you can help. I'm afraid to try and drive vehicle any distance. I'm handicapped with back problem. Many thanks. Hisson0712 (King)

[78zcar_blue]

Please see attached information.

GM HEI info.pdf