reverse switch isnt working correct

[Robin260z]

hi guys i'v got a problem with my reverse lights.

When i change gear into reverse the lights will go burn. But when i loose the gearknob the lights go out.

So i concluded that there is space between the switch and the position of the reverse gear.

Can i adjust this of do i have to buy a new switch?

If so were can i buy a reverse switch?

thx for the help

[Zed Head]

Have you looked at yours on the transmission to see if it has worked its way out of the mounting hole?

I don't think that the switch is adjustable but you can remove it easily without any gear oil leaking out.

[Robin260z]

Have you looked at yours on the transmission to see if it has worked its way out of the mounting hole?

I don't think that the switch is adjustable but you can remove it easily without any gear oil leaking out.

i did have a look actually but didnt focus on the fact that it could have worked its way out.

thanx for the tip i will have a look tomorrow. Maybe its just that small thing.

[H4LIGHTS]

Could also be worn linkage in the transmission or the inner shift boot being stiff / wrong or something else interfering and pushing the shifter/linkage over.