Help! Wheel bearing seal orientation

[boyracer88]

Just in the middle of doing the front wheel bearings on my '72 and am a little stumped. Which side of the inner seal goes towards the spindle? The left (with groove facing engine) or the right (groove facing away from engine) in the picture?

Thanks!

Sorry for cross-posting, just realized there is a "Emergency help" category

Edited March 16, 2011 by boyracer88
cross posting

[DatsunZsRule]

The side shown on the left will be looking inside the hub if that makes sence Remember to pack that "Groove" with grease as well.

The side pictured on the right is the top surface of the seal that will be seen when you look at the back side of the hub.