I searched all over for this info, forgive me if I missed it. I'm looking to confirm the exact size on the fuel hose used for the fuel pump feed and exit to damper and hardline. I found this picture on AtlanticZ to demonstrate what I'm talking about:

I'm looking to get both of the hose sizes represented here. I'm pretty sure it's 3/8", and 5/16", but I'd just like to be sure before I tear it down and empty the lines. I'm doing a Walbro GSL392 inline setup like this using the stock bracket:

Thanks in advance.

That's what I recall -- 3/8" for the intake, and 5/16" for the outlet (or whatever the metric equivalents are) -- 90% certain.

3/8 = 9.5-10 mm

5/16 = 8.0 mm

Dave Ruiz:beer:

That's what I recall -- 3/8" for the intake, and 5/16" for the outlet (or whatever the metric equivalents are) -- 90% certain.

3/8 = 9.5-10 mm

5/16 = 8.0 mm

Dave Ruiz:beer:

Thanks for the info!