problem with my brakes.

well an update so far.

I replaced the wheel bearing and tie rod at the right side of the car.

Left side will be done tomorrow.

I sandblasted my second set off calipers, painted it and placed new seals into it.

The cilinder was perfect so one caliper is ready to be installed yet.

he second caliper is waiting for a set of new seals. I forgot to order two sets of new seals.

My 280zx bmc is also sandblasted and painted aluminium color

Cleaned the reservoirs too. But when building everyting back the seals inside cracked.

So i am searching for new ones but they are hard to find.

So the only thing to do is

-replace the bearings en tie rod left

-install the new seals in the calipers whey ave arrived and then swap them.

-welt my sway bar mounting at the right side

-Repair my 280zx bmc with new seals and swap it with the original bmc.

I hope my brake problem will be over then

Iff someone knews a good site to order some new 280zx brake master cilinder repair kit. Please let me know.

i'll update you guys