Now Braided Brake Master Vacuum Hose available for 240Z.

[esprist]

Now braided brake master vacuum hose is available for Datsun 240Z cars.

Check valve to intake for Series 1 car will be available this summer also.

Opening Special price is available for Classic Z Car Members at

$88-free shipping for Master Booster side

$48-free shiping for Check Valve to Intake side.

(**Free shipping for US main island only)

Payment at support@jdm-car-parts.com

Edited May 4, 2011 by esprist

[Arne]

Jay, are these the correct reinforced type hose?

[esprist]

This is not the same material that was used for th radiator hose. It is Fuel/oil resistant hoses.

It is, again made by Nissan's OEM supplier in Japan.

We are in process of producing Air pump hoses, and other emission hoses. It is taking time because we have to deal with different materials and manufacturing process.

By fall, we should have reproduction wire hose clamps (6-7 different sizes) to cover entire engine bay as well.

That was very clever of you pointing out the difference.

[Arne]

But are they reinforced as well as fuel/oil resistant? Or will they collapse under vacuum?

[esprist]

This is the same material they used on 2011 Nissan/Toyota/Daihatsu/Suzuki/Honda/and so on.

[Arne]

Excellent! I'll be wanting a set. But probably not until next month, as I already blew through my car budget for May!

[Montezuma]

Jay, thanks for working so hard to get great original parts. I love the website as well I look forward to buying some of these great parts soon.

[ajmcforester]

Can't wait to get the first half I'll need to wait for the second half since mine is a early series II

[esprist]

Thank you for all your support!

Due to exchange rate $1=80Yen and Tsunami damage, things and cost of these products are tough, but we are going to put major investment for the Z car parts this year!

[AZ-240z]

Now braided brake master vacuum hose is available for Datsun 240Z cars.

Check valve to intake for Series 1 car will be available this summer also.

Just for clarification, the "check valve to intake" hose you show here is the style that is on my series 1 car with a build date of 1/71. The series 1 cars had both the early and later style for this hose.

Thanks for making this available and I'll be in line for a set.

Dan

[esprist]

As far as I know, Series 1 has vacuum inlet coming out at bottom of Air tube. Series 2 have the same hole but pluged. And It has another inlet at the top.

I aslo found out that you can used these hoses on 74 260Z 75-78 280Z by changing the length. (1 pair of tube cutter is required)

[rtaylor]

Jay, As always, over the top. One question though. What about the 1/4 inch white paint ring that was on the original hose? Should one just use some white SEM paint for that?