Bonzi Lon Posted May 28, 2011 Share #25 Posted May 28, 2011 I was forced to drive in the rain / slight sprinkle, last year at ZCON10. The original, untouched, 3 speed wipers worked just like they did when new, Slowest, Slower, & Slow. Bonzi Lon Link to comment Share on other sites More sharing options...
DonaldTrumpshair Posted December 15, 2011 Share #26 Posted December 15, 2011 I don't drive mine in the rain because some meathead shaved the drip rails and my knees get wet. I have a similar issue, and water drips from under my dash on my legs and on my ecu, where are the driprails? Link to comment Share on other sites More sharing options...
SteveJ Posted December 15, 2011 Share #27 Posted December 15, 2011 I don't drive mine in the rain because some meathead shaved the drip rails and my knees get wet. I have a similar issue, and water drips from under my dash on my legs and on my ecu, where are the driprails?The driprails are on each side of the roof, right over the doors. Link to comment Share on other sites More sharing options...
Jsnrjock Posted September 7, 2012 Share #28 Posted September 7, 2012 Ok guys.. Just finished this set up without any real problems.... Did everything as the thread says but my wipers are parking in the up position.... I rechecked the wiring (it's as the thread says) ... It works great but I want it to park down... Any ideas?! Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted September 7, 2012 Share #29 Posted September 7, 2012 (edited) you put the bracket onto the motor 180 out. so undo the bracket, turn it 180 degrees and rebolt it to the motor. doneBracket as in the peice the connects the wiper linkage to the motor shaft. so just turn it around. Edited September 7, 2012 by Zs-ondabrain Link to comment Share on other sites More sharing options...
Jsnrjock Posted September 7, 2012 Share #30 Posted September 7, 2012 Haha... I was really scratching my head on that one... I'll do that as soon as I get off work... Thanks for getting back to me so fast Link to comment Share on other sites More sharing options...
TomoHawk Posted September 7, 2012 Share #31 Posted September 7, 2012 Dave-It's good to see you're still here. Link to comment Share on other sites More sharing options...
Jsnrjock Posted September 8, 2012 Share #32 Posted September 8, 2012 It works great now! Thanks again Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted September 8, 2012 Share #33 Posted September 8, 2012 Tom, I peek in now and then.Jsnrjock,You're welcome. I did it twice. Almost had to smack myself for the second time. but I was in a hurry and ended up spending even more time due to having fixed my goof.DAve Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now