you reckon you could do the little reflector in the rear bar?

The Round or Square one ?

It looks like it has a backing on the lens itself, so I'm not sure whats in between them, it may have reflective material or something,

Can I make them ? probably not.

I don't want to destroy the ones I have to see how it works.

Nigel

Edited July 10, 201113 yr by Noddle

square ome, i will have to check to so if its reflective

... :-)

Edited July 10, 201113 yr by Noddle

thats awsum looks like all you need is a polish

A little more progress

I bow down to your awesomeness! that is so good!

I know this gets thrown around alot on the internet

But that is EPIC!

very sexy! Repo headquarters........

Finished.....

I found that the mold of the outer tail light I took, was missing a 'step', I did not find this till I tried to fit the outer 'chrome ring'.

When I compared this to the original lens, I saw the small difference, I had to pack spacers to the mounting point of the chrome ring, about 3-4 mm worth,

from the outside you would not notice it.

I'll have to talk to my brother and put my original hand made lens in his lathe and cut a 'step', and make another mold of it.

but, other than that, I'm very happy

Nigel

That is so fantastic, Im really really impressed with your handy work!

you should be really happy with yourself!

Unreal mate well done.

So when id the production run???haha

Hi,

I'll make a change in the outer lens mold, and make 1 set, and see how they come out, (it may take a month)

I'm not sure on how much I should ask for a 'set', but I need to figure out what they cost me in time a martial.

but I have seen originals go for, mid $600

Nigel