SU Jet Depth Calculator with Temperature and Altitude Compensation (XLS Tool)

[240260280z]

Note: This is a Microsoft Excel (XLS) Tool

Click on this link or the screen shot below to download the file: Hitachi Jet Depth Calculator

---

---

[GCSS]

been there tried that ...no good... at least for me anyhow..

[SteveJ]

been there tried that ...no good... at least for me anyhow..

Do you mean that it's no good for the carb that you reassembled after dropping parts?

[240260280z]

Hmmm I just retried it and it worked fine. Is it the version of excel that is causing the problem?

[SteveJ]

It worked for me, too. Note: you must have Excel installed on your computer for this to work.

Edit: I tried it on my Android tablet. It worked on it, too.

Edited October 9, 2011 by SteveJ

[Gary in NJ]

Do you mean that it's no good for the carb that you reassembled after dropping parts?

Zing!

Great little tool Blue. It's a good reminder that a seasonal change in temperature can result in a full turn of the mixture wheels.

I always re-sync the carbs after any adjustment to the nozzle wheels. I'm I just being overly concerned? Do others just turn-n-go?

Edited October 9, 2011 by Gary in NJ

[Captain Obvious]

I always re-sync the carbs after any adjustment to the nozzle wheels. I'm I just being overly concerned?

I think you are being overly concerned. Sync is air volume (basically) and nozzle wheels are fuel.

Changing the nozzle wheels shouldn't do anything to change the volume of air, and hence should not require a re-sync. Of course, if you have the time, there's nothing wrong with doing it anyway. Don't cost nuthin'.

Out of curiosity, have had to make significant sync changes after messing with the nozzles?

(Assuming, of course, sync at the same RPM...)

[Gary in NJ]

Out of curiosity, have had to make significant sync changes after messing with the nozzles? (Assuming, of course, sync at the same RPM...)

Not really. A "tweek" here or there, nothing that actually effects performance. The carbs are always well sync'ed.

I do enjoy a good sync'ing

[240260280]

240z260zSUJetDepthCompTool.xls

240z260zSUJetDepthCompTool.xml