Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

Final Stuff I need to finish the Z


240260280z

Recommended Posts

Looking to buy the following wee parts to finish off a Jan 71 240z resto:

  • center valence panel "chin" Why? Because the paint shop smashed it when towing the car on its dolly then they tried to fix with bondo.

  • passenger door window scissor assembly Why? Because the lower wheel is missing.

  • wedgie striker-guide-things on doors below the latch Why? Because they crumbled.

  • metal panel clips for door and trim. Why? Because some were missing

  • 240z drivers door mirror Why?Because it disappeared during the resto

  • engine vent ducts Why,because they are rotten.

  • yellow plastic marker light.Why, because I over tightened and cracked it

  • keys cut ? (Where can I get blanks?)
  • red touch up 905 paint ? (Where can I get this?)
  • emissions vacuum switch (engine compartment on frame below coil) Why, because it is missing

  • Driver door spring (in hinge) Why, because it is missing

  • 1/2shaft hardware (nuts washers and bolts to hub flange and nuts and washed to differential flange ) Why, because I had to cut the rotten rusty originals off.

  • Plastic Rivets

Link to comment
Share on other sites


Looking to buy the following wee parts to finish off a Jan 71 240z resto:

  • passenger door window scissor assembly Why? Because the lower wheel is missing.

Looks like the window regulators are the same for all 240Z. I think I have one.
  • metal panel clips for door and trim. Why? Because some were missing
Might have a few of these kicking around too. How many are you missing?
  • yellow plastic marker light.Why, because I over tightened and cracked it

I know I have one of these, but not sure how good it is.
  • keys cut ? (Where can I get blanks?)
Jan. '71 is the split - is the ignition key single-cut, or double-cut?
  • red touch up 905 paint ? (Where can I get this?)

I got my 905 touch up from the shop that painted the car. That way I could be more certain it would match the paint on the car. I don't think I'd trust any off the shelf to match the custom mixed that was sprayed on the car. (Of course, three years later, mine has all dried up.)
  • Plastic Rivets

Still available new from Nissan, or numerous online vendors.
Link to comment
Share on other sites

Dan, I hope you can do better than I can.

I knew I had two window regulators, thought they were a pair from the same parts car. Wrong! I've got two LH, no RH. So I struck out there.

I've got three spare amber sidemarker lenses, all three have at least one crack. Don't know why I've kept them this long.

I did come up with seven of the trim panel clips. Blue, if you can't get those from someone in the same shipment as the rest, PM me an address and I'll drop them in the mail.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.