Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

Make a fuel rail


siteunseen

Recommended Posts

I've found -6 size aluminium fuel rail stock on e-bay for $10 a foot, 2 feet + shipping $35, and can get the 5/16" x 1/4" male barbs for about $2.50 then the 1/2" size for the 2 ends, couldn't be more than $4 each. Can borrow taps and bits from Pop. $70 dollars or round about and Pallnet guy on Hybridz wants $155 for a great looking fuel rail I think I could make without the fancy lines machined into it. Anybody ever done it? Is it harder than I think? I know I'd have to use that clear sealer instead of teflon tape.

Edited by siteunseen
add attachment
Link to comment
Share on other sites

Pallnet is first class and saves the headache and risk of errors when learning on your first rail. Plan to drill and cut two.

If you want to improve on the design, source extruded aluminum with two internal passages for send and return and integrate an fpr in one end.

You can also use the stock rail, cut it and bubble flare the ends or braze barbs on the ends: It will look like this:

1.jpg

2.jpg

Link to comment
Share on other sites

  • 4 weeks later...

Do it! I think with a drill press and some drill bits and thread taps it would be easy. Looks like 1/2" on the ends and 1/4" threads for the injectors and cold start. 5/16'' barbs. Thread 2 holes on the bottom for the mounts. I am thinking of mounting my Fuel Pressure Regulator somewhere around the heater hose in & out on the firewall and run the return line from the FPR straight down to the metal line back to the gas tank by the vacuum bottle. Shirley we can do it.

Edited by siteunseen
Link to comment
Share on other sites

Here's the fuel rail that looks better. http://www.azspeed-marine.com/furaex.html it's finned or milled. Whatever, but also read "Milling fins into any surface will increase the available surface area for heat to dissipate from. Increased air flow across the fins would keep the rail cooler."

Edited by siteunseen
Link to comment
Share on other sites

Here's the fuel rail that looks better. http://www.azspeed-marine.com/furaex.html it's finned or milled. Whatever, but also read "Milling fins into any surface will increase the available surface area for heat to dissipate from. Increased air flow across the fins would keep the rail cooler."

The fins are great for transferring heat from hot to cold. In the engine bay, hot is the engine and cold is the fuel rail. The fins will result in hotter fuel not colder.

Just something to think about.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 360 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.