Jump to content
Email logins are now active ×

IGNORED

L28 block+30tho bore flat tops with p90 head will it ping or detonat


zedhead_240

Recommended Posts

do i need a higher octane fuel with this combo, or would it only be needed with n42 head about to buy parts need to know perth australia pistons new from 4cyn nissian pintara u.s.a. ? block L28 bore +30tho rings +60 tho my teck man in oz says it may ping or detonate without advanced timing and higher octane gas down under oz

Link to comment
Share on other sites

On my stroker, I get slight pinging if the ignition is advanced beyong stock timing of 5 BTDC. This is with NGK BP plugs.

Have read that using non-projected plugs *may* reduce pinging / allow more advanced timing in higher compression engines.

Link to comment
Share on other sites

Here is a great utility for mixing and matching L6 bits...

http://www.ozdat.com/ozdatonline/enginedesign/

I don't know anything about the pistons that you mention but if you keep the static compression as defined by the tool in the link above at or below 9.5ish then you should be fine with stock cam and ignition timing on 93+ octane fuel. If your static compression goes much above 10 on these engines then detonation becomes an issue without better gas or excessively retarded ignition.

Link to comment
Share on other sites

do i need a higher octane fuel with this combo, or would it only be needed with n42 head about to buy parts need to know perth australia pistons new from 4cyn nissian pintara u.s.a. ? block L28 bore +30tho rings +60 tho my teck man in oz says it may ping or detonate without advanced timing and higher octane gas down under oz

Remember this is a US based forum.....they don't get what we have and visa versa

I'm running an L28 with VG30DETT flat top pistons (87.5mm vs 86mm stock L28 size) stock Nissan HG and an unshaved P90 head.

Does not ping at all with 20 degrees static on the dizzy with premium fuel and an "A" spec stock camshaft. I calculated the compression ratio to around 8.3, it isn't but will be turbo'ed.

Runs beautifully. :love:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.