Jump to content

Featured Replies

I was browsing under my car and noticed one of the rear control arm bolts was missing, looked on google and here trying to find the dimenstions of the bolt but couldent find it.

does any one know the specs?

Link to comment
https://www.classiczcars.com/forums/topic/41255-rear-control-arm-bolt-size/
Share on other sites

If you are referring to the smaller hardware on the hanging plates and U clamps or the differential/control arm cross member that hold the control arms:

Take another out then go to hardware store (in another car) or order from nissan

Apart from the big beastie in the photo above, I think most are M8 and M10... not sure of thread... usually 1.25 but could be 1.5 so buy both threads if at a hardware store.

Edited by Blue

The other bolts that Blue mentioned are M10 fine thread (1.25mm)

I ended up buying a whole box of them when I was working on my car because the original bolts were so rusted in place that they all snapped off when I tried to remove them.

You could also check the link below. I've changed all the suspension bolts on my Z, so the dimensions are known to be accurate (except for strut nuts)

http://forums.hybridz.org/index.php/topic/98751-suspension-bolts-inventory

Edited by Lazeum

  • 6 months later...

Sorry to bring up an old thread, but I have lost one of these large bolts. I cannot find them online or in any local hardware stores. The size is M22 x 1.50 x 30. Does anyone have one, or know where I can get one? I need the big washer and the toothed ring, too.

Thanks,

Matt

Bug Zs-ondabrain again, he's still kicking and knowing him, he has some still. Send him a PM.

I have a few as well, just not as close! Let me know if you need one.

Create an account or sign in to comment

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.