I Need a Complete set of S.U.'s... Who needs some Upgrades?

[Zs-ondabrain]

My brother finally broke down and bought a 280Z. It has a real messed up FI system. we want to throw it out and replace it with SU's. We're both on a tight budget so I thought I'd throw out the question.......

Who has a complete set of SU's with intakes, ballance tube and carbs? Who are willing to trade for 1) headlight upgrade harness, 1) Parking light upgrade harness and a set of Sidemarker conversion Plugs for their 240Z???

All three items retail at MSA for over $250 + S/H

So all 3 items and I cover the shipping for your SU's set-up shipped to me, cheapest way you want to ship it to me.

PM me or email e at wolfin32z@yahoo.com if you're interested.

I'm not limited to just those 3 upgrades. I can mix and match or do other things, within a reasonable Price.

Dave

[esmit208]

I have complete set Dave with all the attachments and would be willing to trade as I am installing triple OER's on mine. E-mail me at edtwomuchz@gmail.com

[pjoe]

If it doesnt work out...I have a couple sets. Mine would need to be cleaned up and gone through.

Brian

[Bruce Palmer]

Don't forget the heat shield and insulators. How about an aircleaner?

[Zs-ondabrain]

Thank you Ed and Brian.

Brian, I'll keep it in mind but I think I'm gonna go with Esmit208's set, as it's a running set.

Bruce, that's a big 10-4, and a small "Duh" I don't really want him to run without a heatsheild. I think I have an air filter setup.

And on another note, now that the SU's seem to be taken care of.......

Does anyone have a 6-into-1 header, or 3-into-2 with 2 to 1 sleeve???

The car has a stock manifold with a crack and leaks like crazy. The PO installed an MSA exhaust pipe kit but attached it to a bad stock manifold.

Please let me know. As you've ALL likely done in the past, I'm trying to help my brother do it right, the first time, the way it should be done with the help of good people like yourselves. I have NO problem paying for good used parts when needed but also like to do trade work when ever possible.

So if anyone has a header for a 76' 280Z that they are willing to part with for a fair price, some upgrades or ??

Please let me know,

Again, Thank you to everyone so far.

Dave

[Zs-ondabrain]

YOU GUYS ROCK!!! THIS IS WHY I LOVE THIS CLUB.

Ask and you shall recieve. what goes around comes around and treat Karma like your mother, you know why...

I BIG BIG Thanks to Everyone who responded, wrote PM's and Emails to me about what they had and how they wanted to help. Especially to Mike B and Esmit208. Their willingness to jump in and volunteer parts and to do so in trade is what makes this site, it's member and the Datsun Community, the best in the world.

Thanks again to all.

Dave and Family.

[Powderkeg]

Dave,

I wish I would have known earlier that your brother wanted a 280Z.

I'm going to be selling my 76 and it was converted to SU's back in 2004.

Dave Ruiz

[Zs-ondabrain]

Actually, He wanted a 240Z but this 280Z was only $1500 because of all the work I've done to it for the PO and all the work it still needs. Leaking window seals, intake and exhaust, clutch master and slave, minor other things, etc.

But thanks. Whatcha askin?

Dave

[Powderkeg]

Dave ,

I'll PM you.

Dave Ruiz