Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

Please help me choose between two tire sizes for my 14X7.0 slots.


PastorMike

Recommended Posts

Hello all, this is my first post.

I am doing a staged restoration on a sun-baked '71 240 (more on this later), and need an answer to my tire question.

The rims are dealer stock, aluminum slotted, casting shows 14X7.00 on the inside. Offset measures -10mm (yes, minus 10, the original dealer sold Oldsmobiles) which provides a deep dish, and some tire to fender issues (during turns) if the tires are too large. It has 185/70 14 on it now... yuck. Look terrible, and not a legal mount per width requirements.

I have settled on two possibilties and need some influence from the community. Both of these fit the 7" rim: 195/60 14 Michelin Pilot Exalto A/S, or 195/65 14 Michelin Harmony. I want to keep the rims at least for now, not a lot of choices out there. I will probably lower the car an inch or two with new springs.

I have spent hours on the wheels and tires forum, seen things I'd like to do, but no new wheels until the restoration is complete.

Thanks.

Link to comment
Share on other sites

Cozye, according to tirerack's data, 195/70/14 only accommodates a 6.5" rim max (not that you can't go to 7"). The 195/65/14 goes to 7".

Also, remember that I have a large negative wheel offset on the original slots that swings a larger tire into the valence during turns (wish I had zero offset, would have chosen 195/70/14's). The right-side valence was already rolled due to a larger tire interference issue.

Your wheel/tire setup is very nice looking.

Link to comment
Share on other sites

Cozye, according to tirerack's data, 195/70/14 only accommodates a 6.5" rim max (not that you can't go to 7"). The 195/65/14 goes to 7".

Also, remember that I have a large negative wheel offset on the original slots that swings a larger tire into the valence during turns (wish I had zero offset, would have chosen 195/70/14's). The right-side valence was already rolled due to a larger tire interference issue.

Your wheel/tire setup is very nice looking.

Depends on the brand and who you ask. I researched it. Tire shop also checked their data sheet. They said no problem. Some manufacturers also list 5.5-7, some 5.5-6.5 . Its not a problem

Also keep in mind the 65 is shorter, higher revs, speedo off more, and hard to get.

Edited by cozye
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 453 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.