I've replaced my pads and also my rotors; however I still get a squeel whenver I brake at low speeds.

Do I need to rebuild my calipers, or would there be another reason for this?

If I have to rebuild them, where can I buy the parts needed and what parts would they be?

Thanks

What you need are the shims that go behind the brake pads. They are included in the kit shown below, but you may be able to get them separately somewhere else:

http://www.thezstore.com/page/TZS/PROD/SBC04/24-5301

I suspect that you can get the kit from your local Nissan dealer as well.

is that kit what I need to get rid of the squeel or could it be another problem?

Grease your shims.

<iframe width="560" height="315" src="http://www.youtube.com/embed/FlR3OhFZMes" frameborder="0" allowfullscreen></iframe>

Some say that certain brake pads squeal more than others, without the shims. But the shims are pretty much guaranteed to remove the noise. I had the same problem, the low speed, embarrassing "just as you stop at the light surrounded by all of the other cars" squeal. I tried all of the fix-it goos, high temperature grease on the back of the pads, shaping the front edges of the pads, etc. Nothing worked except the shims.

I got my shims from a parts car that I had picked up in the meantime. You might find a set in the wrecking yards, if you're in a hurry or want to save a few dollars. They sit right behind the pads. $20 to MSA to remove the aggravation is worth it though.

Edited December 21, 201113 yr by Zed Head

awesome, ill be purchasing those soon then thank you so much

Don't you need two of those hardware kits? I got a s"set" of shims through the dealer, which gets you two shims, and the brake guy thought you put one on each caliper, probably because he couldn't figure out how they go on?

Don't you need two of those hardware kits? I got a s"set" of shims through the dealer, which gets you two shims, and the brake guy thought you put one on each caliper, probably because he couldn't figure out how they go on?

No, you only need one of the MSA kits. I made the same assumption and ended up with a spare kit. If I thought that I could find it I would offer to sent it to someone, but I misplaced the second kit long ago.

This web site is getting addictive - http://www.carpartsmanual.com/datsunS30/DatsunZIndex/Brake/FrontBrake/tabid/1733/Default.aspx - it's worth a few million words at least.

Someone on this forum pointed it out, I can't remember who, but thanks for that.

Per my records the hardware kit is actually a Nissan part:

41080-N4425

It includes enough shims, pins, clips, etc for both front calipers. You should be able to order it from your local Nissan dealer. Whether that is faster than getting it from MSA depends upon where you are in the country. But with the local dealer there shouldn't be any shipping charges.

Mine only whine when cold (shims on). Rockauto offers all the brake parts for very reasonable price!

With winter coming on here, there doesn't seem to be much rush to make repairs or do maintenance.