need driver side door squeegee

[72 OJ]

I live in the Baltimore/Wash.DC corridor......and need a driver side door squeegee ,mine is dry and leaks ,willing to pay a fair price with shipping or pick up if it is close to me.....thanks:cool:

[tlorber]

If you can find some, grab me one while you are at it. Unfortunately it appears that you have to buy the stainless piece with it. If someone could figure out a way to fasten the rubber to the original metal piece we'd all be in luck.

[grantf]

If you can find some, grab me one while you are at it. Unfortunately it appears that you have to buy the stainless piece with it. If someone could figure out a way to fasten the rubber to the original metal piece we'd all be in luck.

If someone could find the rubber piece without the SS peice I could figure out a way to fasten it. I need them also.

[grretc]

I need them too and was going to try to win the sets going on ebay, but they're going for 380+. It's cheap right now, but just wait until the last minute, that thing will skyrocket!

http://www.ebay.com/itm/Datsun-240Z-260Z-280Z-Outer-Window-Stainless-Squeegee-Trim-Set-NEW-1970-1978-/270885166056?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3f12039be8#ht_500wt_1217

[esmit208]

DATSUN PICKUP WINDOW SQUEEGEES

FITS ON THE UPPER DOOR AND KEEPS THE WATER OUT OF THE DOORS. YOU NEED 4 TO DO BOTH DOORS (2 INNER & 2 OUTER).YOU'LL NEED TO CUT THE LENGTH TO FIT. THEY MEASURE 30.5 INCH LONG THE PHOTO IS JUST OF THE ENDS SO YOU CAN SEE THE PROFILE.

PART: 52120 $53.00 EACH * http://www.new-datsun-parts.com/datsun-pickup-parts.html

These might work even though they advertise for a pickup. Call to find out if they fit Z cars

[SteveJ]

DATSUN PICKUP WINDOW SQUEEGEES

FITS ON THE UPPER DOOR AND KEEPS THE WATER OUT OF THE DOORS. YOU NEED 4 TO DO BOTH DOORS (2 INNER & 2 OUTER).YOU'LL NEED TO CUT THE LENGTH TO FIT. THEY MEASURE 30.5 INCH LONG THE PHOTO IS JUST OF THE ENDS SO YOU CAN SEE THE PROFILE.

PART: 52120 $53.00 EACH * http://www.new-datsun-parts.com/datsun-pickup-parts.html

These might work even though they advertise for a pickup. Call to find out if they fit Z cars

My guess would be that the pickup doors would be slightly smaller.

[jfa.series1]

BD also has them at $50 each for the left and right side. The stainless is nice; they come straight and have to be "warped" into the slight curve of the door edge.

Jim

[72 OJ]

I GOT THEM....found them at DATSUNLANDSOCAL phone #714 3930273...part # D001 $ 48.00..just the rubber squeegee part no metal trim.

[Rainman]

I bought these from Nissan a couple years ago. Shoot me a PM if you need the part number.

[Zealous]

Rainman do you mind posting the part number here for all?

[grantf]

Rainman do you mind posting the part number here for all?

second that.

[tlorber]

So, how are you attaching the rubber to the stainless?