Has anybody ordered from Redline to get their webers?

February 5, 201213 yr

Leon... I think I know you from the side draft forum

Link to comment

https://www.classiczcars.com/forums/topic/42169-has-anybody-ordered-from-redline-to-get-their-webers/?&page=2#findComment-379869

Share on other sites

Remove Ads

February 5, 201213 yr

Author

comment_379890

I found ones online that have 40 DCOE 2

Stamped on them

Link to comment

https://www.classiczcars.com/forums/topic/42169-has-anybody-ordered-from-redline-to-get-their-webers/?&page=2#findComment-379890

Share on other sites

February 5, 201213 yr

Author

comment_379891

Mike my fathers health is failing so quickly I cannot make promises, but I would love to drive to San Antonio in my z to meet all of you fine folks

Link to comment

https://www.classiczcars.com/forums/topic/42169-has-anybody-ordered-from-redline-to-get-their-webers/?&page=2#findComment-379891

Share on other sites

February 6, 201213 yr

comment_379947

Leon... I think I know you from the side draft forum

Definitely, Philip! That place is awesome!

Link to comment

https://www.classiczcars.com/forums/topic/42169-has-anybody-ordered-from-redline-to-get-their-webers/?&page=2#findComment-379947

Share on other sites

February 6, 201213 yr

comment_379948

I found ones online that have 40 DCOE 2
Stamped on them

I know Keith Franck of Sidedraft Central has been working with the 2's quite a bit. I think they came standard on the Lotus 7. David Kizer has a paper on tuning his 2's on the board, looks like it was discovered that the progression holes on that carb are too big (among other things), leading to an off-idle stumble. The solution is to use inserts that Keith Franck developed, in order to downsize or even plug some progressions holes.