Hi,

I'm about to rebuild header. I need to purchase valve spring compressor.

There are several different type of valve spring compressor in the market. Does all of them works for L28 header?

There are 8" and 10" one. Which one works?

Thanks,

Tamo3

I've used this type with the head off.

To do the job with the head on, use the KD 3087 valve spring compressor. I also use the same one when the head is off. I simply bolt the head down to my workbench.

Edited March 12, 201213 yr by Jeff G 78

To do the job with the head on, use the KD 3087 valve spring compressor.

That's the ticket...!!

Carl B.

Thank you for your feedback. KD 3087 seems expensive and not commonly find at store. I will get Blue's recommended one.

Thanks,

tamo3

I've used both many times and the C clamp style works fine if the head is off already, but you will be sorry if you ever need to replace valve seals or decide to add performance springs and a cam. Pulling the head isn't fun and you'll pay for the KD3087 with one new head gasket. I found mine at Tooltopia.com pretty cheap.

Thank you for your feedback. KD 3087 seems expensive and not commonly find at store. I will get Blue's recommended one.

Thanks,

tamo3

I've got a used one (KD 3087) I'll sell you if you're interested. Send me a pm.