Grommet for Mustache Bar

[GreenZZZ]

What are people using for grommets over the access hole for the mustache bar mount bolts? I put some time googling and came up with this.

Works okay though the rubber in the center is very thin. I couldn't remember if there was even a grommet there originally. This is the bolt it is covering....

[darom]

GreenZ, what was the part number of these plugs? Thanks.

I used SecondSkin insulation to cover those access holes.

[ZCurves]

Forget the plugs! I cannot believe the complete tease of groovy green color without giving us some more shots of your Z!! For Shame, I want to see some more!! NO beer for you!! Now post a pic!

[GreenZZZ]

BB45 was the part number, but I could only find it on eBay. Think it was a 40mm hole so I used a 1 1/2 inch inner diameter plug.

http://www.ebay.com/itm/Pack-5-Rubber-Grommets-Hole-Plugs-BB45-/120791678873?pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr&hash=item1c1fbebf99

Forget the plugs! I cannot believe the complete tease of groovy green color without giving us some more shots of your Z!! For Shame, I want to see some more!! NO beer for you!! Now post a pic!

Got some photos in my Gallery (he said opening a beer)...

[bpilati]

What are people using for grommets over the access hole for the mustache bar mount bolts? I put some time googling and came up with this.

[ATTACH=CONFIG]52120[/ATTACH]

Works okay though the rubber in the center is very thin. I couldn't remember if there was even a grommet there originally. This is the bolt it is covering....

Interesting, I learned something today. Because I installed my moustache bar without every accessing that hole or putting a wrench on that bolt. I did it all from underneath.