Post your engine bay / engine detail pics.

[jfa.series1]

The carbs look great. Did the engine run like a dream or did you need to do some tuning on your end to get it running well?

The engine started quickly and ran reasonably well, getting a huge grin from my rebuilder. With slight adjustments to the timing and a few tweaks on the carb mixture, it really smoothed out. Z Therapy rocks for their carb work!!!

Jim

[Diseazd]

The carbs look great. Did the engine run like a dream or did you need to do some tuning on your end to get it running well?

Diseazd, is the valve cover painted? It looks like it is. What method did you use to get the carbs to that finish? That's an achievable asthetic for me, I'm impressed.

Yes.....I screwed it down to a piece of plywood with a gasket using wood screws so nothing could get inside, taped ofF the vent pipe and bead blasted the valve cover. Then used acid etching primer, followed up with VHT silver paint. Mag wheel paint works great also. The carbs and intake are Z Therapy.

Edited April 13, 2012 by Diseazd

[fixitman]

Attached are a few more photos.

Fixitman

[Travel'n Man]

[FastWoman]

The next step will be to lose the yellow/red tubing, replacing it with black tubing and stainless tubing for the longer spans -- when I get around to it.

[GreenZZZ]

Yes.....I screwed it down to a piece of plywood with a gasket using wood screws so nothing could get inside, taped ofF the vent pipe and bead blasted the valve cover. Then used acid etching primer, followed up with VHT silver paint. Mag wheel paint works great also. The carbs and intake are Z Therapy.

I started playing with AlumiBlast paint. Love the idea about mounting the cover on plywood. I've got 2 extra valve covers in the attic that may get blasted.

[Diseazd]

Lee....Where do you stand on your project? Looking forward to seeing your finished product. Guy

[GreenZZZ]

Lee....Where do you stand on your project? Looking forward to seeing your finished product. Guy

Vinyl interior phase. Door panel came out amazing (end of this post)...

[cygnusx1]

Two different approaches.

[Diseazd]

Cygnusx1........One word.....Nice!

Edited April 15, 2012 by Diseazd

[Carl Beck]

Attached are a few more photos.

Fixitman

So.. do you have water running all the time though your heater core?

[Diseazd]

I'll bet he plugged both hoses behind the firewall......who needs heat.