Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

240z Tail Light Shroud Color


ksbeta

Recommended Posts

  • 2 years later...

Question on the Duplicolor #102 Graphite. I've sprayed my rear finisher 2 or 3 times. In between coats I've knocked the sheen off with 0000 steel wool. It looks so good dull I want to spray the matte clear over the lightly sanded Duplicolor. Would that be a mistake? It get's the metallic looking sparkles out but everything I've read says spray the matte straight on the Duplicolor. I'm guessing "it's up to you" will be the consensus but was hoping to hear someone else had done the same.

Thanks for any experiences.

Cliff

Link to comment
Share on other sites

Thanks Dennis, I'd read about the reproduction strips but mine are in pretty good shape for now. I only broke off a 1/4" of that center post removing them and am hoping silicone dobbs will hold it in place until I am ready to do a full on restoration.

After removing them I found that black paint on the red lenses. At 1st I thought it could be soot but it's paint. I don't see the need to re apply it as the strips will cover that area, but if it's needed I'll do it.

OK, now I've found where Dr 240Z has his painted, didn't notice earlier when I read his write up, http://www.classiczcars.com/forums/electrical-s30/51111-240z-tail-light-refurbishment.html

Thanks again Dr 240Z.

Edited by siteunseen
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.