240ZGL Posted May 7, 2012 Share #1 Posted May 7, 2012 1st off yes I have done a search and well, there is no definitive answer to what is the stock wire hook up. No Pertronix, no ZX convertion. Just plain stock wire hook up. Ok, I just did a front harness replacement on my 73. The harness is off a 72 becuse it does not have that stupid aux harness off the voltage reg plug that wires back to the fual pump relay. Anyway, I had a differant setup with my last harness. What I need to know is the stock setup, stock wires, stock wire colors.What I have seen is the long strand with the temp relay wire, yellow also has a black wire with a spade that should go to the distributor. Coil plus side gets a short black/white wire and neg gets a short black wire. The resistor gets the thicker black wire to the back end and green to the front stud. Reason I ask is becuse I have seen lots of photos with all sorts of combinations. Just want to make sure on this. Thanks Link to comment Share on other sites More sharing options...
SteveJ Posted May 7, 2012 Share #2 Posted May 7, 2012 As definitive as you are going to get is the factory service manual. Check the wiring diagram. Link to comment Share on other sites More sharing options...
240ZGL Posted May 7, 2012 Author Share #3 Posted May 7, 2012 Did that, just asking a simple question of anyone who knows if this is right. Link to comment Share on other sites More sharing options...
Wilbur
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now