Does the brand of fuel injector matter?

[Healeyalt]

Thanks for the tip, I'll definately check that out since at around $45 each time 6 plus new 0 rings, etc I'll be spending a few hundred bucks for everyhting and ever little bit helps.

[Zed Head]

I have a set of the BWD injectors and made up a flow checking test rig. The new set I got from O'Reilly a few of years ago all flowed equally, definitely within 5%, an indiscernible difference after about 6 ounces of gas per injector (half a Coke bottle).

[siteunseen]

I'd bet that the rubber seals come with those. My Standards did and they look exactly like the BWDs. Probably made at the same place. Look at the pictures on post #12 http://www.classiczcars.com/forums/thread45474.html.

[mazingerz1976]

Guys, anybody knows if the 300zx N/A injectors are the same of the 280Z and ZX? I´m looking for the injectors and somebody is offering me 300ZX intended ones....

Edited October 2, 2012 by mazingerz1976

[Darrel]

They will work if for a z31. Hopefully they were ones that were replaced on a recall.

[mazingerz1976]

They will work if for a z31. Hopefully they were ones that were replaced on a recall.

Thanks Darrel, I need them for my 280ZX.

[Wade Nelson]

...I bought cheap ($155/set Standard Ignition off Ebay). They've worked fine so far (nearly 2 years as my daily driver).

I bought the same injectors off Ebay. Car runs better than ever.

Be sure you read this thread on injector replacement before you start:

http://www.classiczcars.com/forums/thread47184.html