Motor Trivia...

[JEFF]

Whatever it is out of - it has a lot of smog control.

I see an IAC ( or BBCD ), intake & exhaust manifolds,

pcv, cruse control, and some vacuum lines.

- But I only know about the L24,L26 & L28 motors.

- Jeff

[Zvoiture]

Would this be similar to what is on the 240k /c110 in the other discussion?

steve77/86

[JEFF]

Zvoiture

Are you asking or hinting??

-Jeff

[H4LIGHTS]

I know the answer because the hardware is mine. It was removed from a 1981 280ZX!

The design of the intake manifold is such to be low enough to fit an air cleaner similar to early 510's and allow hood clearance.

You have all noted correctly the tangle of emissions componentry.

Vehicle was LHD but not US spec.

A real piece of Nissan trivia.

I recently sold an intake manifold assy. with a Hitachi 2bbl/ manual choke designed for a non smog L20A. A very clean manifold for a simple throttle body/injector install for something like a MegaSquirt.

[HS30-H]

See - I told you it wasn't from a Z..................

[1GENZED]

IT IS TOO A Z!!!!!!!

WAIT HE SAID ZX, NEVER MIND.

[Stryder]

For those of you who are new...There is a LARGE difference in a Z and in a ZX. The easiest way to remember this is a ZX is a Z with something, a turbo, added. And yes there are other differences. Do ya what to know what they are? WELL ASK SOMEONE ELSE CUZ I HAVE A 240 SO I COULD CARE LESS ABOUT A ZX!