S30 in 3d

[Mikes Z car]

Looks great. Here are some more pictures.

Corner of hatch:______Lower 1/3:

Middle 2/3:__________ Top 3/3

[INST3D]

woo!Beautiful photos!Actually it took me a while to understand where that place is,but I'm extremely glad to see people willing to help

[INST3D]

Remember that noise around the holes above the wheel well?Removed.

Changed blueprint

Started to make the wheel well,outside part.

A little progress,but for now.

Edited October 14, 2012 by INST3D

[Mike]

Wow, impressive work! Glad to see you sticking to the project and pulling through the difficult rear area of the car. I'm sure this wasn't easy to design. How much further do you have to go?

[INST3D]

thanks for the kind words

This depends 50% on time and impression I have and 50% on referals.Now I'm thinking of doing inner mechanical parts or not,such as engine and transmission,the main problem is to understand the detailing,but I see people helping me,so I'll try to do my best.

[INST3D]

Fixed side bumper hole,finished arc,added details on back

[INST3D]

Made holes at the back,made the outer side look fine.fixed the place around the small side window.

[Mikes Z car]

INST3D,

That drawing is really looking good.

Mike

[INST3D]

That drawing is really looking good.

not quite

There are few things seen on the pictures that need to be fixed,for example,arc is not round in some places,the shoulder is too bumpy.

Anyways,the work is still going!I'll try to do my best.

[Mike]

not quite There are few things seen on the pictures that need to be fixed

Spoken like a true artist... keep us posted on your progress... Do you need any more measurements?

[INST3D]

Do you need any more measurements?

I'll ask if I need some.

[INST3D]

After a few hours of work on this part....Hope now it looks correct.

Also started to detail bottom

would be glad to have a picture of the door lock space

like this