Here is a good pic from one off andres14oj posts.

Note that the frame raile is narrower in the front.

sorry for not working on it,been working on some other models lastly

Great looking model! There is a nice translucency so that parts can be seen behind others like an X ray view.

Thank you guys for all the references and comments!They help a lot!

So the engine bay is going to be hard

exams....

Could you please share some pictures of these parts?

http://www.classiczcars.com/forums/attachments/open-zcar-discussion/30717d1246775035-x-ray-view-internal-body-cavities-240z-silverpenneybody.jpg

http://www.classiczcars.com/forums/attachments/body-paint-s30/38971d1289104707-clip-seals-inner-fender-dsc05091.jpg

http://www.classiczcars.com/forums/attachments/body-paint-s30/33619d1262581596-inner-fender-cowl-rubber-cushions-foam-cushions.jpg

http://i536.photobucket.com/albums/ff325/gmac708/240Z/7-25-10010.jpg

http://www.classiczcars.com/forums/attachments/body-paint-s30/41279d1300397479-name-piece-fender-60.-fender-seals.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/DSC_0185-1.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-06124056.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-19155818.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-20131219.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-20131524.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-20131536.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-28135954.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-28135858.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/2012-05-28135834.jpg

http://i536.photobucket.com/albums/ff325/gmac708/painting%20the%20Z/DSC_0187.jpg

http://www.classiczcars.com/forums/attachments/body-paint-s30/58275d1354095437-rust-under-fender-area-2012-11-27-21.16.36.jpg

http://daveparker240z.com/wp-content/uploads/2011/08/303222_10150775620910227_500285226_20418594_3637125_n.jpg

http://www.classiczcars.com/forums/attachments/open-zcar-discussion/30317d1244573167-x-ray-view-internal-body-cavities-240z-pic_0004.jpg

http://i106.photobucket.com/albums/m264/madolive3/IMGP0212.jpg

http://www.hangoverture.com/240Z/UnderCowlFinished.jpg

http://www.classiczcars.com/forums/attachments/body-paint-s30/13818d1156207209-240z-paint-feedback-dsc00255.jpg

Here's a question, at some point in the future do you think this work you are doing could be used as the basis for a 3D printed version of a Z car?

exams....

[ATTACH=CONFIG]63595[/ATTACH]

Could you please share some pictures of these parts?

[ATTACH=CONFIG]63596[/ATTACH]

You might consider providing some guidance with your request. From my very limited experience from making much less complicated drawings I would want pictures straight on to those edges such as straight down, looking from the side, across from one side of the car to the other or from the front of the car. For the area next to the windshield I would think you might also want a picture taken at the same angle as the windshield. Or maybe several angles is the best help? Flash might work better to define lines better?

You may already have all of the pictures you need as another possibility.

Mike

Edited June 16, 201311 yr by Mikes Z car

Blue,Oh thank you dude!These links are very helpful!

grannyknot,there was already a little discussion.I don't know much about 3d printers,also there are some really complex shapes,but I suggest yea it could bee used for 3d-printing

Mikes Z car,yea I have already got all the pictures I need.Thank you.

I'll post some progress as soon as possible

here are some renders

that's pretty fine resolution,so you can open it fullscreen

very nice...cool work... just saw you are russian so even cooler !

Damn...I wish everything on my Z was as straight as in those renders

Beautiful work!