Need help with a heater control cable clip?

[GregP]

I just replaced the heater core, valve, etc. in my 73Z. I am missing the clip that holds the cable to the bracket just before it meets the pivoting lever. This is on the driver side. I used a couple of plastic ties to hold in temporarily. They work but I would like to do it correctly. Does anyone make this clip or do I need to get it used? Anyone have one they want to sell?

[Kurbycar32]

You did a good job with the zip ties. Im pretty sure i have a handful of those clips lying around from random trips to the junk yard. Send me a PM with your address and ill dig around the garage for one.

Edited September 12, 2012 by Kurbycar32

[nsanow]

I have the same issue. I need 3 of the 4 clips if anyone has them. The only one I have is the clip for the long cable that goes up by the blower motor. This is for a 12/70 build 240z.

[Kurbycar32]

i just found that the Z store has these clips now, and they are identical to the ones used on my early 1974 260Z:

 

http://www.thezstore.com/page/TZS/PROD/classic01e/16-9703

 

Heater Cable Clamp, 7/72-73 240Z   Code: 16-9703
Price:$1.83