Jump to content

Hello all,

Can I ask for opinions on the following?

Are you happy with the positioning of the Emergency Brake on your early Z car?

In the UK, we have traditionally called this the "Handbrake" ( is that true for Australia / New Zealand too? ) and I know in Japan it has mainly been known as the "Side Brake".

Some owners will realise that the positioning of the Emergency Brake on the right side of the trans tunnel ( from the viewpoint of the driver sitting in the car ) was the same for both Right Hand Drive and Left Hand Drive versions. As far as I am aware, the only time that the positioning was changed to the OTHER side of the tunnel was in Factory-built "Works" competition cars ( specifically, in SOME of the Works rally cars that were Left Hand Drive - but not all of them ). I think this was only performed on a handful of cars after the Works drivers complained.

As the owner of more than one RHD early Z car, I have always felt that the position of the handle on the right hand side of the tunnel was perfect. When I drove an LHD early Z car for the first time, I was shocked to find how awkwardly positioned the Emergency Brake seemed.

I have in the past owned a fair few non-Z LHD cars ( American, French, Italian, German ) and I think I remember that the handbrakes were usually centrally-mounted or were otherwise easy to get to and use effectively and sportingly ( especially for the odd handbrake-assisted turn ). The early Z cars seem to be unusual in the way that they kept the same position on both LHD and RHD cars.

What do you think?

Alan T.

Link to comment
https://www.classiczcars.com/forums/topic/4488-interior-ergonomics/
Share on other sites

Featured Replies

Originally posted by HS30-H

So, this business of Design Concession and LHD / RHD is still going on.............

Alan T.

Alan, I have to ask the question.

Which is better to drive, RHD or LHD.

Having only driven RHD zeds I have no idea if they drive better from the left or right as designed?

Any others out there that have driven both versions?


Well Zedrally, you certainly like to put me on the spot don't you?!:ermm::classic:

Naturally, having grown up in an RHD environment I should imagine that I grew up used to that configuration and to driving on the left. However, I have owned a fair few LHD cars over the years ( European and even some American ) and have driven them over here in the UK. It could be inconvenient sometimes ( overtaking, toll booths, car parks etc ) but that was not always anything to do with the actual ergonomic layout of the car interior. It's just naturally more comfortable to drive an LHD car in an LHD enviroment and vice-versa.

I suspect that it comes down to the individual car type, as I certainly found it just as easy to adapt to either - although I'd honestly rather have my RIGHT hand on the wheel at all times. Since we are referring more specifically to S30-series Z cars, then I'd have to say that I felt happier in RHD. I must try not to sound biased - but in the LHD I felt very conscious that my feet were down there near the exhaust and that there must have been a big weight bias on the left side of the car even without me sitting in it. How much of this is psychosomatic I couldn't tell you! I do know that I drove an RHD Z long before I ever tried one in LHD layout - so that will probably have influenced me about what felt 'funny'.

I'm sure that 99.999% of LHD Z car owners will not ever have considered that there would be anything 'wrong' or unergonomic about the layout of their cars. It's just not an issue. That's natural. Probably a lot of those people would feel most uncomfortable in an RHD car. Its hard to come to any strong conclusion from this with regard to what is 'better'.

What I WILL say ( and it gets back to the original theme of this thread ) is that I did find the Handbrake position on the LHD car to be most inconvenient for me. But again, I'm sure that 99.999% of LHD owners will not even have thought about it.

Its always worth having a go in the opposite version to what you drive, if you ever get the opportunity.

Alan T.

Originally posted by HS30-H

snip

but in the LHD I felt very conscious that my feet were down there near the exhaust

Alan T.

You're up late tonight Alan!

Ha... the exhaust, never thought of it being underneath there and being a built in toe warmer for those Northern Climates!

Long live the land of Sunshine and perpetual warmth.ROFL

I'm sure that 99.999% of LHD Z car owners will not ever have considered that there would be anything 'wrong' or unergonomic about the layout of their cars. It's just not an issue. That's natural. Probably a lot of those people would feel most uncomfortable in an RHD car. Its hard to come to any strong conclusion from this with regard to what is 'better'.

Right on that point. If our HLS30's are a design consession, They did just fine. It's quite comfortable and ergonmic for a sports car. Driving a RHD car in North America, your too busy trying to see around the car ahead to note differences in the driver ergonomics! I have driven HLS's and SPL/SRL's for so long, having the handbrake on the left side would seem odd

Zedrally, I'm often up late due to my job. I have to try to fit in with Japanese time zones - but I DO need a kip in the middle of the night. I've got bad jet-lag now. Its 4.30am and I'm wide awake. Takes ages to adjust these days ( getting old you see ).

Of course toe-warming from the exhaust would be all well and good in a perpetually cold climate, but surely it gets a little TOO hot down there on the LHD cars in particularly hot climates? Unlike the passenger in an RHD car, the driver is somewhat stuck with keeping his / her right foot on the accel pedal. I'm sure that the majority ( that old 99.999% again ) of LHD drivers will not think this is an issue, but it got me thinking. I'm reminded of a comment about the RHD pedal layout ( from an LHD user ) to the effect that there looked to be 'less space' in the RHD footwell / pedal area than in the LHD version. Of course, this is not actually the case. In fact, if anything I would say that the right foot possibly has more space in the RHD layout, and the clutch-foot rest is well sited to work properly.

Maybe more important to me was that feeling of much weight on the left side of the car. Not that I'm all that heavy myself ( getting heavier though! ) - but its that mental image of carbs, inlet manifold, exhaust manifold, brake booster and m.cylinder, clutch m.cylinder, steering column and wheel, pedals, full exhaust system etc etc - ALL on one side of the car that made me wonder. There's not much balancing it out on the right side of the car - especially if you are the single occupant.

Alfadog, is this the 'thin ice' that you mentioned? Am I going too far? I have to be honest, it is something that I've always pondered over. Now that I've heard Matsuo san talk so much of the inherited layout constrictions being RHD biased, its got me going again.

Does anybody else agree / disagree?

Alan,

I wonder if you would be in a position to comment on the later Z series cars as it relates to designing a car for both LHD and RHD in light of your discussions with Matsuo san. I wonder if when designing the S130,Z31,Z32, and Z33 the Nissan design team were able to not feel the squeeze of quite so many cost constraints (doubtful given the World economic situation in each era that Z cars were introduced) when ink hit paper.

Having owned and driven only LHD Z cars since age 19 it is the source of some laughs when I consider this long running thread as I climb into the later Z series cars that I am lucky enough to own. I must say that the 350Z with its handbrake on the driver's side (LHD) feels an awful lot like my MA70 Supra Turbo and both SA and FC RX7's in terms of driver ergonomics.

Alan,

I don't want to alter the nature of the thread, however, without discussing ergonomics, simply is there any apprechiable difference in driving the LHD or RHD versions aparty from the obvious.

Is there any performance differences such as better handling etc?

With our pre-empting you I would think that the RHD version would have to be better balanced and thus a better 'handler' on the road or was there ballast added into the LHD to counteract the im-balance?

Keep up the good work, we all look forward to your reports from Japan.

Originally posted by daddz

Alan,

I wonder if you would be in a position to comment on the later Z series cars as it relates to designing a car for both LHD and RHD in light of your discussions with Matsuo san. I wonder if when designing the S130,Z31,Z32, and Z33 the Nissan design team were able to not feel the squeeze of quite so many cost constraints (doubtful given the World economic situation in each era that Z cars were introduced) when ink hit paper.

Hi daddz,

I'm sorry to say that I have VERY limited first-hand experience of the later cars. I've got to admit that I have no deep knowledge of the specs / layouts - although I have driven one of each type and passengered a LOT in a friend's 2-seater Z31 whilst living in Japan. Actually, I really liked that car - but it was far from standard.

I think its clear that as they pushed the prices up for the later models ( in relation to the S30-series ) they were able to indulge themselves a little more. Just how much this translates to the ergonomics I couldn't say ( you'd be much better placed to judge that than I would ). Mind you, seeing as the S130-series was still using the L-series 6, you'd have to say that it was still carrying a little bit of the Design Concession dictated by that engines RHD-biased origin. Surely the V6 models would be less troubled by this?

Its an interesting area of discussion, but maybe one that I don't feel qualified to speculate on - considering my ignorance of the later cars.

Not to infer any insult to the later cars, but I WAS surprised by Matsuo's scathing comments on the S130-series cars and his dismissal of all the later generations too. Still, I guess this is a legacy of his bad-treatment by Nissan and the fact that they have ( until very recently ) all but ignored his part in the design of the S-30 series Z. This is all bad blood from the mid-Seventies, when he walked out of Nissan and never went back.

I think its interesting that the location of the Handbrake on the Z33 is seemingly being biased towards the LHD market. Isn't it also on the left side of the tunnel for the RHD market cars? That would appear to be a reversal of the S30-series situation, and probably a recognition of the fact that they KNEW they would sell more Z33's in LHD than RHD?

Alan T.

Originally posted by Zedrally

Alan,

I don't want to alter the nature of the thread, however, without discussing ergonomics, simply is there any apprechiable difference in driving the LHD or RHD versions aparty from the obvious.

Is there any performance differences such as better handling etc?

Putting me on the spot again! Now I really AM walking on eggshells...............

I don't know how much any of the 'imbalance' would actually MATTER on a street-driven car. I think these days motoring journalists tend to take things a bit more scientifically than they did back in the late Sixties. There's a lot of talk of dynamics that seems to be gleaned from driving the cars ( even little family cars and MPVs! ) well beyond the limits of practical everyday use. I guess this is useful up to a point and in pure terms - but surely Joe Average does not get anywhere near these limits in normal use? In many cases it seems to be motoring publications that are interested in this kind of data rather than the manufacturers themselves.

Reading most contemporary reviews of the S-30 series cars, it seems clear that this kind of analysis was not really so deeply undertaken. Maybe if they had back-to-back comparisons of RHD and LHD versions then they might have noticed differences? In any case, in all practical terms, I would have thought it was a non-issue for most owners ( as Victor stated above ). We just tend to adapt.

I do think it revealing that Nissan found it necessary to have different springs for the front left and front right of the LHD cars. I would have thought that this was to even-up the ride height as much as anything else, and does not appear to have been necessary on the RHD cars ( most all of which had higher spring and damper rates than the USA-market model anyway ).

And there's a point; seeing as the majority of LHD cars were more softly sprung and damped, and the fact that most of them lacked the rear anti-roll bar, then it would surely be difficult to make a truly fair back-to-back comparison with an RHD car anyway?

Am I right in stating that the majority of test-tracks and race-tracks in the USA are run anti-clockwise? In Europe and Japan, the majority have always been run clockwise ( and sometimes both ways! ). There was a period where many of the major European sports and race car manufacturers were manufacturing RHD race cars precisely to help balance them on clockwise circuits, despite the fact that their home-market was LHD. Keeping the weight of the driver on the 'inside' was seen as an advantage.

I'm sure that Matsuo san and his team would have loved to have been given unlimited resources and no limitations to design and build a car that would be equally as ergonomic, balanced and efficient in ALL the markets that it was intended to be sold in. However, reality dictated a different situation. Its clear that, however much they accommodated the needs of the Export market driver, they were still constrained by the fact that the home market was RHD biased.

But as we say, in most practical terms this would not seem to be an issue with most S30-series Z owners. The location of the Handbrake DOES ( in my opinion ) help to point to the fact that the S30-series Z was not designed purely "for" the USA market, no matter what the advertising and sales men said at the time, and has been repeated robot-like ever since.

I'm still not 'knocking' the LHD cars - whatever anyone thinks.

Alan T.

Alan,

Regarding the rear sway bar for LHD Z cars; most of my S30 experience has been with later S30's ('75-'78) and they were equipped with rear sway bars from the factory. I believe that the rear sway bar was added with the introduction of the 260Z here in the 'states as the added weight began showing itself in the vehicle's behavior.

Regarding the e-brake in the Z32 and Z33 cars; I will check some websites for photos of the Z32 RHD and I have a Z33 brochure for the Japanese Market that should provide us with an answer.

Most races are run counter-clockwise with the exception of Summit Point Raceway located just outside of the Washington area where races are run clockwise. It is great fun watching both LHD and RHD cars on the track at the same time and observing what the driver's do to adjust to their situation. Races like the Rolex 24 Hour at Daytona are run counter clockwise to give you an example.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.