Scaotty Posted November 29, 2012 Share #1 Posted November 29, 2012 I've been looking at how to remove the aluminum trim on the doors that go around the windows when they roll up. After briefly inspecting I did not see an easy way to remove them. So I thought I would come on here and see if its worth it, or should I just leave them on. Any advice would be very appreciated. Link to comment Share on other sites More sharing options...
zKars Posted November 29, 2012 Share #2 Posted November 29, 2012 (edited) If you are talking about the window channel that is part of the door, ie the three sided SS frame that the glass fits into when up, its held on with several bolts. You can see several on the door at the latch edge and a couple in front, but there are at least three more you need to access with the interior door trim panel removed.Why do you want to remove it? There is no way the glass can seal against the body without it. Edited November 29, 2012 by zKars Link to comment Share on other sites More sharing options...
Scaotty Posted November 30, 2012 Author Share #3 Posted November 30, 2012 Im stripping the doors and taking them off the car for eventual body work and paint. I plan on putting them back on after paint. Thanks for the info! I appreciate it. Link to comment Share on other sites More sharing options...
zKars
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now