Arne Posted December 31, 2012 Share #1 Posted December 31, 2012 (edited) Rather than let these threads go on forever as they do in some other forums, I thought I'd start new ones for separate generations for the New Year. Use these threads for short, Twitter-like posts, things that may not be worth their own thread.Since only the S30 threads got any use over the past couple of years, I've only created this one thread this year for all Zs.Enjoy, and let's keep each other involved! Edited January 1, 2013 by Arne Link to comment Share on other sites More sharing options...
240260280z Posted January 1, 2013 Share #2 Posted January 1, 2013 (edited) Thanks for the Tradition Arne! HAPPY NEW YEAR.... maybe a Z in 2013 for you?Picked up a Weber 55DCO /SP Crazy big. 48mm chokes, 180F9180 mains, 60F8 Idles, 0Spill just before the New Years party... finally looked at it now... not a 50. Edited January 1, 2013 by Blue Link to comment Share on other sites More sharing options...
doradox Posted January 1, 2013 Share #3 Posted January 1, 2013 Welded in the drivers side rocker panel. Link to comment Share on other sites More sharing options...
justinyee Posted January 1, 2013 Share #4 Posted January 1, 2013 Woke up and admired the car. Happy New Years! Link to comment Share on other sites More sharing options...
Arne Posted January 1, 2013 Author Share #5 Posted January 1, 2013 Thanks for the Tradition Arne! HAPPY NEW YEAR.... maybe a Z in 2013 for you?Not at all likely. But as I've said before, never say never. Who knows what strange opportunity might kick in my front door? Link to comment Share on other sites More sharing options...
tlorber Posted January 1, 2013 Share #6 Posted January 1, 2013 (edited) Just got back from a 140 mile run. The car ran great. One piece of info I thought I'd pass on; last week I had my front wheels road force balanced. Great results-there is absolutely no wheel shimmy through 100 mph. I did not get above that due to road conditions. I highly recommend this form of balancing and will have it done to my driver as well.Oh yeah, last night (technically before new years) I installed a rocker switch for the antenna mast. I put it in the blank just forward of the ashtray in the center console. It's nice to be able to move the antenna so easily.Happy and healthy new year to all. Edited January 1, 2013 by tlorber Link to comment Share on other sites More sharing options...
LeonV Posted January 1, 2013 Share #7 Posted January 1, 2013 I didn't even end up staying up until 12 last night. Got up early today and finally diagnosed why the speedo doesn't work. I ended up replacing the speedo cable (had one laying around). Now it's clear I need a different speedo gear! Link to comment Share on other sites More sharing options...
cajunz Posted January 1, 2013 Share #8 Posted January 1, 2013 Since it was 10 below zero this morning, I fired up the furnace in the garage and finished refinishing the clutch/brake pedal box and the fuel/vapor tank. Now they look like new. I guess the next project is refurb of the fuel tank. Happy New Years to everyone. Link to comment Share on other sites More sharing options...
gnosez Posted January 2, 2013 Share #9 Posted January 2, 2013 Spend the day wet sanding the 240 race car prior to being painting in the BSR livery and test mounted the flared front fenders. Needs about a 100 hrs of more work to get it paint worthy. Link to comment Share on other sites More sharing options...
Walter Moore Posted January 2, 2013 Share #10 Posted January 2, 2013 I walked around my Z on the way to my snow plow... does that count? Link to comment Share on other sites More sharing options...
SteveJ Posted January 4, 2013 Share #11 Posted January 4, 2013 I drove the 260Z to work and to the Georgia Z Club meeting. It's a nice change of pace from the daily driver. Link to comment Share on other sites More sharing options...
comhosa Posted January 4, 2013 Share #12 Posted January 4, 2013 (edited) happy new year, got another 71 240z, working on suspension, hoping to post pics soon Edited January 4, 2013 by comhosa Link to comment Share on other sites More sharing options...
Wilbur
Recommended Posts