Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

Cannon Intake Manifold rod end possible solution


Zedyone_kenobi

Recommended Posts

Three mounting points on a shaft are often trouble. You have to do it right, or not do it at all.

For those of us that aren't familiar with this system at all (like me)... Can you take a closer-upper pic of the linkage and it's mounts? Fill the long way of the frame with the linkage rod you currently have?

Link to comment
Share on other sites

IF it has two mounting rods, it simply cannot bind. The rod ends usually have 10-20 degrees of angularity build into them, so you will be okay.

With two, It can only flex in the middle, like mine does. This can be avoided of course in many ways. You can get a beefy actuation rod (3/8" should do it), or you can pull near a mounting point if you can get the springs and linkages to work out. I have mine in mechanically the worst possible position in the middle, and I exasperate it by using a BEEFy return spring.

I am going to get this solved one way or the other.

I did some poking around this morning and found out hat my pedal digs into the carpet and I cannot go WOT :stupid::stupid:

Making these linkages work is NOT hard, but it takes attention to details and time. Luckily for me, I genuinely LOVE it.

I was thinking last night that a torsional spring that wraps around the acuation rod at both ends would be a VERY clean way to get return actuation if you can find a way to mount it to the actuation rod on one end and then fix it on the other end to the intake somewhere.

Link to comment
Share on other sites

I was thinking last night that a torsional spring that wraps around the acuation rod at both ends would be a VERY clean way to get return actuation.

I like that idea. That would remove the tangential component of the spring completely. Just like so many other throttle return springs.

Mill some flats onto the actuator rod or drill a cross hole... Anything to get a grip on it. Attach some brackets to the rod to accept a hook on one end of the spring, and then hook the other end of the springs to the mounting points.

Link to comment
Share on other sites

Okay, I generated this up pretty quickly, but you can get my idea. All of this is available from McMasterCarr

8516561570_1568b874de_b.jpg

You would have to buy the collar, and drill some small holes in it which you would put dowel pins

Next you need to make a plate out of some scrap metal. The rod end is already on your manifold. One end of the spring will rest against a dowel on the collar. The other end of the spring will stick into one of the holes in the plate being held by the rod end.

The plate between the nuts will need some anti rotation feature, but that is nothing to implement.

Opinions?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 353 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.