i need a picture, anyone?

[pacemkr]

i was almost set on a set of 195/70 r14 tires for my 1.5" lowered 240.

but i found a tire that i might be interested in but only comes in 65 and 60 series aspect ratio

does anyone have a picture of a 240 with the thinner profile tires on it, so i can get an idea of how they look in the wheel well.

thanks for any help you folks can share. considering 195/60 r14 and 195/65 r14.

[SteveJ]

I have 215/60 R14s on my 260Z. That's only a little bigger than the 195/65 R14. It looks fine to me.

[Casey_z]

These are 195 65R 14"

Hope this helps.

[Dr. 240Z]

These are 195/60 X 14"

Hope this helps

Cheers,

George

[beermanpete]

195/60R14 on 6" wide wheels. We have the Tokico lowering springs installed as well.

[Jeff G 78]

Here's my race car with 195/60R14 tires. It is lowered about 1.5". On a race car, they look good, but I think they'd look a bit small on a street car.

[Reverend]

Btw. what is the widest tire that fits original 14" slot mag? Currently running 195/60.

[Jeff G 78]

Koalia, the problem is that there really aren't any wider tires available in a 14" size. They still make racing slicks wider, but otherwise, the selection is dwindling.

[mgood]

I have 205 / 70 / 14 on mine on a 76 - 280. I did have 215 / 60 / 14 Goodyear Eagle GT on mine before these, BF Goodrich TA, they are considered all season.

Edited March 6, 2013 by mgood

[djwarner]

Btw. what is the widest tire that fits original 14" slot mag? Currently running 195/60.

The general rule of thumb is that the tread width should be equal to the rim width +- a half and inch. I just mounted 205/70R14 on my standard height series I 240Z with no problems.

[Arne]

Btw. what is the widest tire that fits original 14" slot mag? Currently running 195/60.

Depends. Those slot mags were available back in the day in widths from 5.5" to 7".