What are you on the look out for?

[Mikes Z car]

That is the patented knob extraction hole.

I wonder if there was a rubber plug in the hole originally? I don't remember seeing holes in my car other than the standard holes all the same size with rubber plugs. I don't have plugs in mine now (no carpet) and every once in a while a washer or nut drops out through a hole.

Maybe the knob is hiding in the seat supports.

[e-tek]

Front and rear bumpers for my 72....

[Taz0162]

Drain hole. You need the drain hole plug to stop those pesky radio knobs from falling through.

[Stanley]

Not sure how to fix that knob extraction/drain hole. Do I use a shop rag, or go hi-tech and use duct tape?

[Mikes Z car]

For a concourse type car the duct tape would be suitable.

[Marty Rogan]

I am on the look out for a Suspension Techniques rear sway bar for my '70. The 7/8" thick one, with all the mounting hardware and the vertical transverse link mounts.

Marty

[LeonV]

I am on the look out for a Suspension Techniques rear sway bar for my '70. The 7/8" thick one, with all the mounting hardware and the vertical transverse link mounts.

Marty

Talk to John Coffey: Beta Motorsports, LLC Products

Don't know if ST did a 7/8" one though.

[Marty Rogan]

Talk to John Coffey: Beta Motorsports, LLC Products

Don't know if ST did a 7/8" one though.

I did some searching and they list them as 3/4" now. All of the diagrams do not show the transverse link vertical braces. Did they change their design to the type that mounts to the floor?

[jcb]

I am looking for a fuse panel cover for a 1978/280z. JB

[LeonV]

I did some searching and they list them as 3/4" now. All of the diagrams do not show the transverse link vertical braces. Did they change their design to the type that mounts to the floor?

Check out the pics on the Betamotorsports site.

[Marty Rogan]

Check out the pics on the Betamotorsports site.

Thanks. The picture does show the brace with the "ears" for a rear mount, but the description of the kit never mentions them. I am trying to find out if they come with the kit, or you have to get them fabricated.

[LeonV]

Thanks. The picture does show the brace with the "ears" for a rear mount, but the description of the kit never mentions them. I am trying to find out if they come with the kit, or you have to get them fabricated.

Why not just call them up and talk to John? You can even PM him since he's a member here.